Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 99)

KAYENNE K-FRAME — User Manual 99
Setting a Pattern Mix
Setting a Pattern Mix
You can combine the complex wipe pattern generators ( P1 and P2 ), to create
a wide variety of customized wipes.
1. Double press the Wipe 1 button in the Transition area. This selects Wipe 1
as the next transition type, and also opens the Wipes menu with
PRI
Wipe 1 delegated for control.
2. Select the P1 pattern to be used by touching the Wipe Pattern button
between the Pattern Mix and Generator/Border data pads, and then selecting
one of the displayed patterns in the Pattern tab on the right.
Figure 53. Wipes, Patterns Menu
3. Select the Pattern Mix data pad, this switches the Pattern tab on the right
to the other generator; in this case P2 (to select the base wipe pattern
again, touch the Wipe Pattern button as in Step 2).
4. Touch the Mix data pad located below the Pattern tab. Additional
control buttons will appear at the bottom of the menu.
5. Delegate that ME for preview in the System Bar.
6. Press the Trans PVW button in the Transition area, and move the lever
arm part way. This will display the P1 pattern on preview.