Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 263)

KAYENNE K-FRAME — User Manual 263
Control Panel Overview
ME Delegation
Any stripe can control any ME, delegation can be saved in Panel Memory.
DELG Button
The light blue DELG button on any Local E-MEM Module puts that module
into Panel Delegation mode and displays MEs delegated to the suite in
rows that correspond to the top to bottom Stripes on that Control Panel.
Current ME selections are high tallied with the defined ME color. Pressing
the button for an ME or PGM PST ME delegates the corresponding Stripe
to the selected ME. The same selection can be made on more than one row.
Note Only those MEs for which physical MEs have been assigned to the suite are
displayed in Delegation mode on the Local E-MEM Module.
If the Control Panel has fewer than four Stripes, then only rows for those
Stripes present will be shown. If the Control Panel has more than four
stripes, then pressing the
Page button on the Local E-MEM Module will
show the ME delegations for those additional Stripes.
Exchange ME
The Exchange ME button (see Transition Module on page 243 ) allows you to del-
egate MEs that are not assigned to a Stripe. For example on a 4.5-ME
Kayenne system with four Stripes, the fifth ME can be ‘exchanged’ with a
currently delegated ME on that Stripe by pressing the
Exchange ME button.
The function is global for all Stripes, i.e. if ME-4 is unassigned, pressing the
Exchange ME button on the current PGM PST Stripe assigns ME-4 to that
Stripe and PGM PST is available for exchange (delegation) on each Stripe’s
Exchange ME button.
For Kayenne systems with more than one additional ME than available
Stripes, an ME can be preassigned to the
Exchange ME button by holding
down the button and selecting the ME for exchange on the Local E-MEM
Module. Only one ME for exchange can be assigned at a time.
The Exchange ME button displays the color of the unassigned ME. For the
example above with PGM PST and ME-4, when PGM PST is red and ME-4
is purple, after ME-4 is exchanged with PGM PST the
Exchange ME button
changes from purple to red (for each Exchange ME button on all Stripes in that
suite).
Automatic Delegation
With the ADel button toggled on in the Multi-Function Module, when an
operator activates any object on a Stripe, the Multi-Function Module will
automatically delegate to control the specific object involved. For example,
selecting a key for the next transition, automatically delegates the other
modules in that Stripe, and the Multi-Function Module to control that