Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 292)

292 KAYENNE K-FRAME — User Manual
Section 8 — Advanced Operations
Changing the Duration of a New Keyframe
The value for a new keyframe’s duration may be set from the keypad. For
example, the following procedure was used for
Figure 166 .
1. Move the edit cursor to the desired location in the effect, in this case on
the path midway through a one second keyframe.
2. Press KF Duration button.
3. Type a 1.0 duration value on the keypad and press Enter to change the
value displayed on the readout.
Note Pressing Emem Edit, <enter value>, TRIM in the Master E-MEM Module will
increase or decrease the duration value by the amount specified.
4. Press Insert Before or Insert After to insert the new keyframe with the
specified duration.
Figure 166. Insert KF with Duration Specified
Modifying an Existing Keyframe Duration
The duration of an existing keyframe can also be modified. For example,
the following procedure was used for
Figure 167 .
1. Move the cursor to the keyframe whose duration you wish to modify.
You cannot modify a keyframe duration when the cursor is on the path.
In this case, the keyframe duration is 15 frames.
2. Press the KF Duration button to display the keypad.
3. Type a 1.0 duration value on the keypad and press Enter to change the
value displayed on the readout.
1 2 3 4
0.00 1.00 1.15 3.00
3 4 5
0.15 3.00 1.15 3.15
1 2
0.00
Insert,
With 1 Second KF Duration Entered
KF Dur 0.15
Edit Cursor On Path
0618_04_136_
r0
New
Keyframe
New
Keyframe Duration 1.00
Effect Duration Increased