To swap e-dpm channels – Grass Valley Kayenne K-Frame v.7.0 User Manual
Page 371
KAYENNE K-FRAME — User Manual
371
Copy/Swap
2.
Press the Source
eDPM
),
K1-K4
buttons of the top row
are now assigned as e-DPM channels Ch1-Ch4 (the button legends
remain
K1-K4
).
3.
Select a Source e-DPM channel.
4.
Select the Destination
eDPM
button (
K1-K4
destination button LED labels
change to
Ch1-Ch4)
.
5.
Select a Destination e-DPM channel.
6.
Press the
Copy
button (below the joystick).
To Swap e-DPM Channels:
e-DPM Channels can swapped with Keyers and vice versa.
1.
From the Home mode in the Multi-Function Module, press the Swap
button.
2.
Press the Source
eDPM
),
K1-K4
buttons of the top row
are now assigned as e-DPM channels Ch1-Ch4, however the button
legends remain
K1-K4
.
3.
Select a Source e-DPM channel.
4.
Press the Destination
eDPM
button,
K1-K4
destination button LED labels
change to
Ch1-Ch4
.
5.
Select a Destination e-DPM channel.
6.
Press the
Swap
button (below the joystick).
Undo Button
The
Undo
button (below the joystick) reverses a copy or swap operation that
has been performed. Only one level of undo is supported. For example,
pressing
Undo
a second times does not return the MEs to their previous
states before the first Undo was performed.