Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 176)

176 KAYENNE K-FRAME — User Manual
Section 5 — Switcher Control
2. Touch the Macro Register number button of the register you wish to
record into, in the scrolling list.
3. Touch the Record button.
4. Perform the steps you wish recorded into the macro, in the order they
are to be performed, using the Control Panel and/or the menus.
5. Touch the Stop button to end the macro recording.
You can name the macro either before you record it, or after by touching the
name data pad for that macro register to bring up a keypad.
Enter a Macro Panel Name
The “Panel Name” column is provided in the Macro Catalog menu’s,
Macro List pane; four characters maximum. GV Switcher displays that
name in place of the Macro Register Number in the Local E-MEM area
(when the Macro menu is delegated by pressing the
Macro button in that
ME).
1. Select Macros, Catalog in the menu.
2. Select the Panel Name data pad next to the desired macro register.
3. Enter a four-character name in the pop-up keyboard, and touch Enter .
Note If there is no Panel Name entered, the Macro menu in the Local E-MEM
Module will display the macro register number; it does not display the OLED
name.
Attaching a Macro
1. Go to the Macros Attach menu (touch Macros , Attach ) ( Figure 101 .