Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 63)

KAYENNE K-FRAME — User Manual 63
Show Files
Figure 30. Update Show File Operations
CAUTION The Eng Setup button is off by default as ports and server IPs are unique so
transferring Show files from one location to another (including suites)
requires planning to prevent interruption.
2. Navigate to and touch the Show file you wish to update in the Directory
pane (left side of menu).
3. Touch the Update Show button in the Show Create & Load pane to bring
up the Create Show pane that allows you to see what files are contained
in the Show, and choose which files to load by touching the File Type
buttons.
4. In the Create Show pane, touch to select/deselect file types, or touch
the
Select All button (e-DPM is an option, if not installed the button will
be inactive).
5. Select the register data pad (left of each button) and enter a series or
range of registers to be included in the Show file (the default is all).
Note A best practice is to set the E-MEM range from 0-999 each time there is an
update, this will ensure that new registers are included (the same practice can
be applied to other file types).
6. Touch the Update button in the Create Show pane to update the Show
file.