Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 118)

118 KAYENNE K-FRAME — User Manual
Section 4 — Video Mix/Effects
Glow adds a soft edged variable opacity border around keys, leaving the
original keyed image unmodified, and is a standard feature available on all
GV Switcher systems.
Off — The Glow effect is deactivated.
Glow — The Glow effect is applied around the keyed image which remains
visible.
Note Full raster video must be resized or cropped for glow to be visible.
Glow Only — The glow effect is applied to the entire keyed area, replacing the
original keyed image. Only the glow is shown.
Outline — The glow effect is shown around the keyed area, but the original
keyed image is not shown. Only the border area of the glow is visible.
When the Glow pane is activated, knob controls for Glow Width , Aspect ,
Opacity , and Softness are available.
Note The Glow Softness parameter value is shared with Shadow Softness.
Adjusting either Glow or Shadow Softness will affect both Glow and Shadow
Softness.
Glow Color
When the Glow Color pane is activated, knob controls for matte Hue , Satura-
tion , and Brightness become available. An approximation of the color of the
matte is shown at the bottom of the pane. Use these controls to adjust the
color of the Glow.
Figure 69. Glow Color
Glow Path Control Pane
Controls for glow path, using the standard Hold , S Linear , Linear , and Curve
parameters, can be applied when the Adjust Path button is on (top right of
Borderline menu).