Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 224)

224 KAYENNE K-FRAME — User Manual
Section 6 — Device Control
Controlling Aux Bus Source Selections from a Router
Aux buses are enabled for control in the Eng Setup, Outputs menu
(
Figure 123 ).
Figure 123. Eng Setup, Outputs Menu, Router Control of Aux Buses
Enable the Aux Buses for router control ( Figure 123 ):
1. Touch the Aux button in the Output Type.
2. Touch a Aux 1-46 data pad in the Logical Aux Bus pane to designate it
for router control.
3. Touch the Router Control selector button (highlights green when
selected).
Repeat Steps 1-3 for each Aux Bus you wish to control by router.
The router must have the switcher sources defined and the 46 Aux Busses
defined as destinations, with four levels each (see the documentation that
came with your router):
Level 1: Suite 1 Video,
Level 2: Suite 1 Key,
Level 3: Suite 2 Video, and