Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 141)

KAYENNE K-FRAME — User Manual 141
Output Recursive Menu
Note Additive effect with Picture Decay.
Strobe Timing :
Period — defines the number of frames in a Strobe Cycle. Period is only
available when Time is selected as the Strobe Type.
On Time — sets the percentage of the period that the image is unfrozen.
The default is 0.0%. On Time is only available when Time is selected as
the Strobe Type.
Strobe Type buttons — set the type of strobe effect that will cause the auto-
matic capture of the new image.
• None — turns Strobe Off
• Time — freezes a new image at an adjustable time interval (normal
strobe)
• Keyframe — freezes a new image at each keyframe
Loop button —
ON — starts the recursive effect
OFF — stops the recursive effect and returns to live video
Keyframe Reset button — used to control when images are frozen. It is only
available when the Keyframe mode button is selected as the Strobe Type.
• ON — A keyframe triggers a reset, followed by a new single strobe. It
resets that loop by creating a new frozen image at each keyframe that
has the
Keyframe Reset button on.
• OFF — does not change the frozen image at each keyframe
Force Strobe button — When an effect passes over or stops on a keyframe, a
single strobe event is triggered. While the effect sits on a keyframe with
keyframe-strobe on, no additional events are triggered. The “history” of the
prior single event is discarded, and a single strobe is triggered again.
• ON — accumulates a field/frame of video within the Output Recursive
loop.
• OFF — No action is taken.
Mode buttons —
• Over — places the image over the remnant or “montage”.
• Under — places the image under the remnant.
• Erase — erases the image and remnant.