Grass Valley Kayenne K-Frame v.7.0 User Manual
Page 142
142
KAYENNE K-FRAME — User Manual
Section 4 — Video Mix/Effects
Show Picture
parameter button —
•
ON
— (default) displays the live video image in addition to the still mon-
tage.
•
OFF
— displays only the montage without the live video image.
Matte Control
buttons
—
None
— No matte
Matte
— allows you to create a matte fill for the montage and activates
the Hue, Saturation, and Brightness soft knobs for modifying the matte.
Rainbow
— allows you to create an alternating RGB rainbow matte fill
for the montage and activates the Hue Speed, Saturation, and Bright-
ness soft knobs for modifying the matte.
Matte
Parameter — activates the soft knobs for Hue (or Hue Speed for
Rainbow Matte), Saturation, and Brightness and displays those values.
Trails Mode
Leaves a trail of partial images behind as the image is moved around the
screen. A “wind blown” effect can be added to the images (decay settings
can be adjusted to look like particles) (
Soft Knob Button Group:
Picture Decay
— causes the frozen image in the Output Recursive to fade
away evenly over time.
Note
Additive effect with Star Decay.
Star Decay
— causes random pixels of the frozen image in the Output
Recursive to fade away over time.
Note
Additive effect with Picture Decay.
Strobe Timing
:
Period
— defines the number of frames in a Strobe Cycle. Period is only
available when Time
is
selected as the Strobe Type.
On Time
— sets the percentage of the period that the image is unfrozen.
The default is 0.0%.
On Time
is only available when Time
is
selected as
the Strobe Type.
Appearance
button
— located bottom left of the menu, displays the “Pic”
or Picture Decay value from the soft knob data pad.
Wind
button— displays the Direction and Velocity (speed) values from
the soft knob data pads.