Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 191)

KAYENNE K-FRAME — User Manual 191
Bus Linking
Controlling bus to the Linked bus, provided all links are not inhibited (see
below). Link Enable is keyframeable.
Other controls on this menu can be used to manage bus links.
Bus Hold Inhibits Links – This control affects the behavior of the Control Panel
Hold button for all Linked buses. When Bus Hold Inhibits Links is On and the
Hold button on a Linked bus is also On, that Linked bus will ignore bus link
commands and will not change sources when Controlling bus sources
change. Note that the
Hold button retains its existing functionality, keeping
that bus from changing sources when an E-MEM register is recalled.
Inhibit All Links – Overrides all Link Enable settings to disable all active bus
links. This does not change the individual Link Enable settings, however.
Turning Disable All Links off will re-enable any bus links with Link Enable on.