Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 100)

100 KAYENNE K-FRAME — User Manual
Section 4 — Video Mix/Effects
7. Touch the delegation button in the Pri Wipe 1 column to delegate the
menu to control the Pri Wipe 1 pattern generator.
8. Touch the Pattern Mix button so its indicator illuminates. The preview
monitor will now show the combined Mix 1 and Mix 2 pattern.
9. You can select the type of pattern mix with the Mix type buttons ( Mix ,
NAM + , NAM – ). The NAM buttons are used for And or Or pattern mixing.
10. You can also adjust the amount each wipe pattern contributes to the mix
with the
Ratio control. At 50%, each pattern contributes equally. At 25%,
the other pattern contributes only 25% to the final pattern.
About Source Memory
Source Memory is a K-Frame system feature that can be used to retain
keyer settings for each source on each keyer bus. Source Memory permits
the operator to, for example, hot cut from one source to another on that
keyer bus and automatically restore different settings learned for each
keyer source.
Source Memory settings for a keyer source are only applied when that
source is selected on that keyer bus. Selecting on that keyer bus a different
source that does not have learned Source Memory will restore the previous
keyer settings.
Source Memory keying settings include:
• Keyer Mode settings, including Preset Pattern and Chroma
• Keyer Mask settings
• Keyer and Wipes Mattes settings
• ME Video Proc settings (Keyer sources only)
• ME RGB Color Correct (Keyer sources only
• Wipes settings (Keyer sources only)
Source Memory settings are explicitly learned and deleted, using the Source
Memory button.
The following are NOT affected by Source Memory:
• Split keys
• Keyer Borderline settings
• Keystore settings
• Background sources
• Aux sources