Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 354)

354 KAYENNE K-FRAME — User Manual
Section 8 — Advanced Operations
Touch the eDPM mode button (lower left), eDPM , Corner Pinning ( Figure 207 ).
Figure 207. eDPM, Corner Pinning Menu
An example of how Corner Pinning would be valuable is that during a
sporting event, a camera points at a shot clock. The DPM uses Corner
Pinning to build a box to contain the clock and crop adjustments place the
clock exactly in the box but the camera is accidentally moved and the
content of the box no longer shows the entire shot clock. Using Pan and
Scan, you can move the camera content to be shown correctly without
moving the edges of the box.
Note Crop enables/disables and crop edge parameter changes are global. For
example, if crops are enabled in the iDPM, Transform menu, and the top crop
edge parameter was changed, the effect would be mirrored in the Corner
Pinning menu and vice versa in the iDPM, Corner Pinning menu.
Create a Corner Pinning Effect (Example)
By completing this task you will have an understanding of how to create an
effect using Corner Pinning. This understanding of Corner Pinning func-
tionality will allow you to create Corner Pinning effects for your own show.
1. Select a background source.
2. Select a source for a keyer, and cut on the key over the background.