Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 415)

KAYENNE K-FRAME — User Manual 415
ClipStore
3. Click Choose homegroup and sharing options .
4. Click Change advanced sharing settings.. .
5. Click the radio button next to Turn off network discovery .
6. Click the radio button next to Turn off password protected sharing .
Click Save Changes .
ClipStore
With the seamless integration of the K2 Summit/Solo technology into the
Image Store menus, you can record and play clips with audio. The Summit
provides four Video/Key channels while the Solo provides two.
Note See the Installation & Service Manual for your switcher model for engi-
neering configuration information.
• The ClipStore is supplied to record and playback with AVC-Intra 100 or
DVCPRO HD compression format. Clips imported in DVCPRO HD,
DVCPRO 25/50, DV, and MPEG-2 will play natively.
• The ClipStore supports embedded audio only. The AES inputs and
outputs are not used.
The ClipStore is completely configured and controlled from the GV
Switcher menu and control panel. There is no need to use the built-in
AppCenter Elite software. In fact, if changes are made to the ClipStore
using AppCenter, they will be overwritten by the switcher the next time it
sends a configuration to the ClipStore.
Note To change the Summit IP address, see the Installation & Service Manual for
your switcher model.
This highly integrated solution provides several powerful features,
including:
• Fast access to clips and folders,
• Large storage capacity,
• Non-volatile memory—no loss of images due to power failure,
• Clip control from the GV Switcher Menu Panel and clip stack control
from the GV Switcher Control Panel,
• ClipStore device controls (including macros and cues) are E-MEMable,
and
• Make sub-clips from clips and build composite clips with audio.