Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 187)

KAYENNE K-FRAME — User Manual 187
Bus Linking
Creating Parallel Bus Links
Parallel Links allow the controlling bus to control more than one linked bus.
In the example in
Figure 106 , PGM A is the controlling bus and Aux 1,
Aux 2, and ME1 Key1, are all linked in parallel to PGM A.
Figure 106. Parallel Links
1. Touch the Controlling Bus data pad in the Table Setup pane; the
Controlling Bus selection menu is displayed.
2. Touch the ME Busses , Aux Busses , or eDPM Inputs tab and touch the desired
bus. The selected bus is displayed in the Controlling Bus data pad (in the
example in Figure 106 , the selected bus is PGM A).
3. Touch the Linked Bus data pad in the Table Setup pane; the Linked Bus
selection menu is displayed.
4. Touch the ME Busses , Aux Busses , or eDPM Inputs tab and touch the desired
bus. The menu closes and returns to the Bus Links menu. The selected
bus is displayed in the
Linked Bus data pad.
5. Touch the Linked Bus data pad again and touch the next bus you wish to
link to the controlling bus.
6. If desired, assign different source tables to the bus links:
a. Touch a Linked Bus data pad in the Current Link pane.