Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 101)

KAYENNE K-FRAME — User Manual 101
About Source Memory
Learning Source Memory for a Keyer
1. Select a source on a keyer bus and setup the keyer with the desired
settings, using the Control Panel and/or menus.
2. Go to the Keyer/Mode menu and select the keyer whose settings you
want to save to that keyer source’s Source Memory.
3. Touch the Source Memory button. The Source Memory window appears
( Figure 54 ).
Figure 54. Source Memory Window
• Touching Cancel exits the Source Memory window without making
any changes.
4. Touch the Learn button. The settings are saved for that keyer source on
that ME’s keyer bus, and will be applied whenever that source is
selected on that ME’s keyer bus.
When a keyer source with settings saved to Source Memory is selected on
a keyer bus, the
Source Memory button is highlighted when that keyer is
selected in the Keyer Mode menu.