Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 188)

188 KAYENNE K-FRAME — User Manual
Section 5 — Switcher Control
b. Touch a source table in the Table Setup pane.
Creating Cascading Bus Links
In Cascading Links, a controlling bus (A) has a linked bus (B) which in turn
acts as the controlling bus for another linked bus (C), and so on. Changing
a source on the controlling bus (A) will cause a change on both linked
busses (B and C).
Example: In Figure 107 , Controller PGM A controls Linked Aux 1, Linked
Aux 1 is the controller for Linked Aux 2, and Linked Aux 2 is the controller
for Linked Aux 3.
Button Color Definitions —The following applies for Cascading Links in the
Current Link pane, as seen in the example in Figure 107 :
• Black —Controller but not controlled: PGM A Bus is a controller but is
not controlled so it is black in color.
• Green —Controlled and controls: Aux 1 Bus and Aux 2 Bus although
controllers, are also controlled so they are green in color.
• Blue —Aux 3 Bus is controlled but is not a controller therefore it is blue.