Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 161)

KAYENNE K-FRAME — User Manual 161
Section
5
Switcher Control
Basic E-MEM Operations
The E-MEM (Effects Memory) system provides a way of storing effects for
later use. An effect defines parameter settings that determine how the
selected video sources are processed. An E-MEM effect is learned into an
effect register, and can then be recalled at a later time with a single button
press. Effects can be edited after they have been learned, and effect data can
also be saved to and loaded from disk.
The GV Switcher system has 1000 E-MEM registers organized into Pages
and Banks. There are ten pages of ten banks with 100 E-MEM registers each,
that can be learned and recalled from the menu or in the Local and Master
E-MEM areas.
Register operations such as Learn and Recall can be performed in the
current page and bank or changed before selecting the desired register.
Time Value Entry
Time values are input on the GV Switcher Control Panel Local E-MEM and
Master E-MEM areas in seconds, frames, odd field format, using the
•
button the separator (indicated below as “ • ” ) and pressing the hard button
below “Enter” in the display to complete the entry:
(seconds) , • , (frames) , • , (field) , Enter
The default time entry is in frames. For example, a time of 15 frames (one
half second on 60 hz systems) can be input simply by pressing:
15 , Enter
Entries in seconds can be entered by adding one separator. For example, a
time of 1 second is input by pressing:
1 , • , Enter
An odd field is input by pressing 1 as the last entry. For example, a time of
one second 15 frames and one field is input by pressing: