Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 193)

KAYENNE K-FRAME — User Manual 193
Section
6
Device Control
The GV Switcher system can control devices like DDRs, VTRs, character
generators, etc., and can also control the Image Store clips and stills and
GPIs to any external device. GV Switcher device control only supports
devices that have been associated with GV Switcher sources.
Note K-Frame Image Store channels do not support the Gang function.
Note External Devices are configured for control in the Ports & Devices, External
Devices menu. See the Installation & Service Manual for your switcher model
for more information.
The following provide device control operations from the Kayenne system:
• System Bar,
• Local Aux Module,
• Multi-Function Module,
• Module Option, and
• The Menu Panel or Kayenne Menu on a PC.
System Bar
Figure 108. System Bar Example
Device control from the System Bar is performed in the Device Control
Groups (Two for a 1-ME Kayenne system and six for a 2-ME (2-ME Stripes)
and larger), which consists of a 16 character Status Display (displays the
current clip) and Play, Cue/Load, Next Clip, and Previous Clip buttons.
Note Off Air Advance and Auto Start buttons are accessed from the Kayenne menu
and the Multi-Function Module (Devs, ADV/APLY), not on the System Bar.
Also, Rewind, Fast Forward, Stop, Jog +/Jog -, Mark In, and Gang Rolls are
not supported on the System Bar (but are supported in the Device Control
Module).
Attch
Enble Show
Attch
Repl
Attch
Insrt
Delay Rec Delete eDPM Sec
PVW ME
4
PGM ME
3
ME
2
ME
1
Switched
Preview Macro Pvw
PRI
Cu Cue /
Load
Play Play Prev Prev Ne Next Cu Cue /
Load
Play Play Prev Prev Ne Next Ø Ø : Ø 1 : 5 9 : 1 Ø O m n i _ 5 2 5