Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 446)

446 KAYENNE K-FRAME — User Manual
Glossary
Register
A place to store an effect.
Saturation
The degree of purity of a color. Adding white
to a color reduces its degree of saturation.
Self Key
A key effect in which a single video signal
serves as both the key cut and key fill.
Sequence
On the GV Switcher system, a feature allow-
ing a series of E-MEMs to be recalled in a spe-
cific order with a single command.
Serial Digital Video
Passing video data bits in serial form (one bit
after another), along a single wire. Standard
Definition serial digital video (SMPTE 259M)
operates at 270 MBits/sec (2 x 13.5 MHz x 10
bits).
Serial Interface
An interface which allows the switcher to be
controlled remotely by a computer editor or
other serial controller. Data is passed serially
between the editor and the switcher at select-
able baud (transmission) rates.
Serializer
A device that converts parallel digital infor-
mation to serial.
Soft Border
A wipe pattern border which is mixed on the
edges to give a soft effect.
Soft Edge
A pattern edge between two video signals in
which the signals are mixed for a soft effect.
Source
1) An external device providing video. A
source may provide only one video signal, or
it may provide two signals (key fill and key
cut).
2) The video signal(s) from a source, along
with the source definition information asso-
ciated with that source. See
Source Definition .
Source Definition
A definition of the video signals making up a
source, the device type and name of source,
and the default processing and other param-
eters to be used for that source. The
GV Switcher system is based on source selec-
tion, rather than choosing crosspoints.
Source Memory
A feature where the last keying and video
processing settings for a source are retained
and re-imposed when that source is re-select-
ed. Default source memory values can be set
for each source on each bus.
SPOP (Single Press Open)
Automatically opening a related menu when
a control panel button is pressed. On the GV
Switcher system, buttons supporting SPOP
are labeled with a graphical indicator.
Stack
See Key Priority .
Suite
One or more control surfaces configured for
use on the same project.
Suite Preference
A collection of settings used to configure a
suite to create a consistent working environ-
ment for all involved.