Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 312)

312 KAYENNE K-FRAME — User Manual
Section 8 — Advanced Operations
register will learn a default state with all sub-levels enabled and any
‘defined’ sub-levels disabled.
Define E-MEM
Sub-levels can be made definable on an effect by effect basis to be included
in a level when an effect is recalled.
Note Define E-MEM is not keyframeable.
For a sub-level, there are three states possible:
• Not assigned—Not controlled by an E-MEM, for example if you want
manual control of an Aux Bus and do not want it to be recalled by an
E-MEM.
• Assigned to a E-MEM MISC Level—Under typical E-MEM control.
• Definable—Define which level will own a sub-level on an effect by
effect basis.
With GV Switcher, sub-levels which are set to be defined can be ‘enabled’
in any level.
The ten E-MEM Preferences levels’ sub-levels can be made as ‘definable’ in
the User Setups, Suite Prefs, E-MEM Prefs, menu.
Making E-MEM Sub-levels Definable to Other Levels
1. Select an E-MEM Level.
2. Touch the sub-level you wish to make definable ( Figure 177 ).
3. Touch the Definable button, lower right in the menu ( Figure 177 ).
4. Repeat steps 1 and 2 for each sub-level you wish to make definable.