Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 177)

KAYENNE K-FRAME — User Manual 177
Performing Macro Operations from the Menu
Figure 101. Macros Attach Menu
2. Select the button you wish to attach a macro to. You can either touch the
physical panel button while
Show Attach mode is active, which will scroll
to and blink that button on the Macros Attach menu, or you can use the
menu to select the panel section and then scroll the Macro Attachments
list to display the desired button.
3. Touch the Pre , Replace , or Post parameter touch button (upper right).
4. Touch the menu button for the macro register to be attached.
5. If desired, name the macro by touching the Name data pad and
entering the name in the pop-up keyboard. Press
Enter .
Playing an Attached Macro
1. Turn on the attachment playback feature by pressing the Attach Enable
button so it is illuminated. You may also want to press the Show Attach
button so that panel buttons with macros attached can be identified
(they blink low tally).
2. Press the panel button that has the macro attached.