Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 279)

KAYENNE K-FRAME — User Manual 279
Transitions
Transitions
ME and Local Aux Panel transitions can be performed on the Kayenne
Control Panel. Transitions are also possible from the ME, Transition menu.
Transition Module
Manual Transitions
Manual transitions are preset with the next transition element buttons. Any
elements that are active when a transition is performed will change state.
Active keyers will transition from on-air to off-air or vice versa. Back-
ground transitions will occur between the A and B buses with a flip flop at
the end of transition, ensuring the A bus is always on-air and the B bus is
off-air when a transition is not in progress. Any element not selected in the
next transition element group retains its current state. Combinations of ele-
ments can be included in the same transition by selecting more than one
transition element button.
Figure 157. Transition Module
8623627_03
M Mix Trans ns
PVW
Trans ans
Rate
EMEM EMEM
Run un
Ptn tn
Lim Limit
Pst
BLK
Key Key
1
Key Key
2
Key Key
3
Key Key
4
Key Key
5
Key Key
6
Ke Key 1
Cut Cut
Ke Key 2
Cut Cut
Ke Key 4
Cut Cut
Ke Key 3
Cut Cut
Ke Key 6
Cut Cut
Ke Key 5
Cut Cut
Ke Key 1
Auto Auto
Ke Key 2
Auto Auto
Ke Key 3
Auto Auto
Ke Key 4
Auto Auto
Ke Key 6
Auto Auto
Cut Cut Auto Auto
Ke Key 5
Auto Auto
User er
5
User er
6
User er
4
Wipe ipe
2
Wipe ipe
1
User er
3
User er
2
User er
1
Key
Prior
Main Transition Controls
(3 Groups and Lever Arm)
Other Transition
Controls (2)
Keyer Transition Controls
(12)
Transition
Lever Arm