Enable source correction on any source (globally) – Grass Valley Kayenne K-Frame v.7.0 User Manual
Page 44
44
KAYENNE K-FRAME — User Manual
Section 3 — Setting Suite Preferences
3.
Select the Logical ID of the source you wish to change by either:
•
Touching the Logical ID data pad (
) and entering the
Logical ID number, or
•
Scrolling through the Source Names list with the scroll bar. This
scrolls the list without changing the current selection. When the
desired source appears on the menu, touch its Logical ID button to
select it. Use the
Lock
button to lock the scroll bar.
4.
Give sources alternative names in the Source Patch menu in the
following ways (
):
•
Panel Name —Source will appear in the Transition and Multi-Function
displays with this name,
•
OLED Name (SND Name column)—Source Name Display will appear
in mapped ME/PGM PST Source Select and the Multi-Function dis-
plays with this name,
•
Menu Name (Menu Name column)—Source will appear with this
name in the menus only.
To change the source patching, select an Engineering/Fixed source to be
associated with the currently selected Logical source with the Engineering
Source data pad or by scrolling the Engineering Source IDs Button pane
(
).
Enable Source Correction on any Source (Globally)
Using Source Corrections, in the User Setups, Source Patch menu (or the
Source Corrections menu), you can enable source correction for a patched
Engineering to Logical source. The source correction is global; anywhere
the patched source is mapped on the switcher. Source Correction is saved
as part of File Ops, User Setups, Suite Prefs and can be included/excluded.
Note
Enabled Source Correction on a source is not E-MEMable, however patching
a source on an ME, from the Source Corrections menu, is E-MEMable.
1.
Choose the source and enable Source Correction:
a.
In the User Setups, Suite Prefs, Source Patch menu, touch the
Enable
button to the right of the desired Source Patch row, or
b.
In the Source Correction menu, touch the
Logical Name
data pad and
enter the Logical ID in the pop-up keypad then turn on the Source
Correction
Enable
button.
2.
Adjust the parameters for Video Processing and RGB Color Correction
in the Source Correction menu.
Note
The same Engineering source can have Source Correction enabled or dis-
abled by patching the source to a different logical ID.