Movie cueing and playback controls, Movie playback with the system bar, Movie control with kayenne modules – Grass Valley Kayenne K-Frame v.7.0 User Manual
Page 391
KAYENNE K-FRAME — User Manual
391
About the Image Store Movies Option
Movie Cueing and Playback Controls
Once a movie is loaded and selected for control, the Cue to Start, Play
Reverse, Stop, Play Forward, and Cue to End buttons are available. Addi-
tional menu playback controls include:
Loop
—Sets the movie to run continuously, jumping from its last frame to the
first.
Bounce
—Sets the movie to run to its end, reverse playback to its beginning,
then play forward, and repeat (only available when Loop is active).
Auto Start
—Sets the movie to play when taken On-Air.
KF Trigs
— Enables EMEM KF triggering (see Movie Replay with E-MEM (KF
Timecode
—Opens a keypad allowing entry of a time code value to cue the
movie to. This control is also available on the Movie Record and Movie Edit
menus.
Mark In
—Sets the current cued location of the movie as its playback start
point.
Mark Out
— Sets the current location of the movie as its playback end point.
Cue to Begin
— Cues to the Mark In point, if set.
Var Play Speed
— When On, plays the clip at the percentage speed displayed
on the right. Clicking on the percentage allows entry of the desired speed.
Supported range is from 0.1% to 5000%.
Jog Movie
—The knob on the Menu Panel can be used to jog the movie for-
wards and backwards. This control is also available on the Movie Record
and Movie Edit menus.
Movie Playback with the System Bar
Selecting an Image Store channel on the PVW bus activates the System Bar
controls, which will display the currently loaded item. The System Bar
Cue/
Load
,
Play
,
Previous
, and
Next
buttons allow the loading, cuing and playback
of movies on that Image Store channel.
If a Image Store channel is selected on the PGM bus, holding down that
source select button activates the System Bar for control of that Image Store
channel.
Movie Control with Kayenne Modules
The Kayenne Multi-Function and Device Control modules can also be used
to control movies. Delegating these Kayenne modules to an Image Store
channel provides all the recording and playback controls available on those
modules.