Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 98)

98 KAYENNE K-FRAME — User Manual
Section 4 — Video Mix/Effects
Grabbing a Key Store Image
The keyer settings are defined in the Eng Setup, Source Definition menu
where for example you can set a key to a Linear or Shaped Video. You will
need to define these parameters when creating a Key Store, if not defined
the key will be full raster white.
You can ‘Grab’ both a video and key frame simultaneously by touching
either the
Grab V&K 1 or Grab V&K 2 button, located below each Frame Store
page, or you can touch a Grab button for any of the four Video/Cutout
Frame Stores ( Figure 52 ).
Once you grab fill and key images in Key Store, they are available for the
selected key source:
1. Touch Keyer , Keystore .
Figure 52. Key Store Menu
2. Touch a keyer with which you want to use a Key Store ( Figure 52 , left).
3. Touch either the Use Live V&K , Use FS 1 V&K , or Use FS2 V&K to select the
Video and Key source image ( Figure 52 ), or
a. Touch the Keyer Video Source you want as fill.
b. Touch the Keyer Cutout Source you want as the key cut.