Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 95)

KAYENNE K-FRAME — User Manual 95
Setting Keyer Priority
3. Select the keyer you wish to move in the stack in the Current column,
then use the
Top , Move Up , Move Down , and Bottom buttons on the left to
place the key in the desired location. The key priority order changes
immediately, as a cut.
Transitioning Between Different Keyer Priorities
Key priority transitions use a Current priority stack and a Next priority
stack. The transition occurs between the two stacks.
Note You can also apply the following to the Keyer Secondary Priority Stack when
an ME is in Split Mode.
1. Press the Key Prior Transition Element button in the Transition area
(button row under status display, far left function button).
2. If not already set up, turn on the desired keys and arrange them so they
overlap, observing the Program monitor. This will make the changes in
key priority visible. For demonstration purposes, you can use four
preset pattern keys.
3. Delegate that ME for preview in the Preview button group on the
System Bar. This shows the end result of the transition (the Next
priority).
4. Go to the Keyer, Priority menu in the Menu Panel by pressing Keyer ,
Priority .
5. The current stack in the menu is automatically set to what is currently
being output. You can change the Current priority stacking order if
desired, as described on
page 95 .