Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 203)

KAYENNE K-FRAME — User Manual 203
• Cue library (Q-MEM with 1000 Q-MEM Registers)
• Ability to recall large numbers of clips/marks
• Create virtual clips as mark in/out point within another clip
• Create assemblies of clips which span channels (for example Video
and Key and driving video walls with 4 or 8 channels),
• Ability to record a clip to a device, cue to mark-in, and add a play
command.
• Cue can be for more than one device
• Variable speed play,
• Multiple Device Control:
• Swap between controlled devices,
• Channel ganging,
• Create recordings, and
• Loops:
• Stop, and
• Play.
The Device Control Module can control all configured devices with the fol-
lowing properties:
• Current Mark in/out,
• Current duration,
• Current clip name,
• Current loop flag,
• List of currently ganged devices.
Device Selection
Device selection buttons A-F ( Figure 113 ) can be configured to control
devices in the Device Control Module.
1. Select a device by rotating the Device Select knob ( Figure 113 ) to scroll
through the devices.
2. Press the LRN button.
3. Press one of the device buttons ( A-F ) to assign the current device.
The F button only, can be made to track the selection on the right-most of
the source control selections on the System Bar, by pressing the SDEL (Set
Delegate Tracking) button on the Device Control Module. When the SDEL
button is on, it high tallies blue and the F button low tallies blue.