Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 231)

KAYENNE K-FRAME — User Manual 231
Camera Control with Ethernet Camera Tally
4. On the Master E-MEM Module, press Learn . The R-MEM setting in the
menu will be updated to the header area of that E-MEM effect register.
Keyframes existing in the effect will remain unchanged. The
corresponding R-MEM register in the menu will also be updated.
Loading R-MEM Registers
Like E-MEM registers, loading an R-MEM register from disk does not affect
the current work buffer. If an effect is loaded in the work buffer and that
register number containing different settings is loaded from disk, the reg-
ister will need to be recalled before any changes in state occur.
Empty R-MEM Keyframes
If the R-MEM enable button is on when keyframes on other levels are
inserted into the effect, R-MEM keyframes containing effectively no data
will also be added to the effect and appear on the Timeline menu. These
keyframes are only system artifacts and do not influence the running of the
effect.
Camera Control with Ethernet Camera Tally
GV Switcher Camera Integration provides the ability to place cameras into
a usable but not fully shaded setup/rehearsal mode. The GV Switcher can
connect to up to 99 cameras via the Grass Valley LDK Connect Gateway.
Cameras can be acquired by multiple suites.
Note For configuration information, see the Installation & Service Manual for your
switcher model.
Switcher camera control is provided in the menu.
Camera control from the GV Switcher system makes camera source setup
fast and easy by allowing you to:
• Turn color bars on/off to quickly identify which source is associated
with a camera,
• Control a subset of camera settings:
• Auto Iris enable/disable,
• Auto Black level (trigger),
• ND (Neutral Density) Filter settings, and
• Load a Scene File with a single button push or recall a Scene File with
an E-MEM.
Note The Camera sub-level is assigned to an E-MEM level in the Menu Panel.