Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 122)

122 KAYENNE K-FRAME — User Manual
Section 4 — Video Mix/Effects
Mod Type Pane
With an axis selected, you select the type of modulation to be applied to
that axis (
Position Mod or Size Mod ), or no modulation at all with the Mod Off
button in the Modulation Mode pane. When the Vertical axis is selected, you
can choose to have that axis’ modulation values match the horizontal
values with the
Track Horiz button.
When Size Mod is selected in the Modulation Mode pane, the Size Mod
Center data pad in the Modulation pane is active. When this data pad is
selected soft knob controls for
H Position , V Position , and H/V Angle are avail-
able ( Figure 72 ).
Figure 72. Kurl Menu, Size Mod Center
Pattern Pane
The type of wave pattern to be applied to the selected axis and modulation
type is selected in the Pattern pane.
Cycle Limiting — activates the Cycles soft knob. This control can be used
to limit the number of wave pattern cycles.
Cycles + ve Only — selects only the positive portion of the wave cycle.
Representative wave shapes are shown in Figure 73 .