Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 61)

KAYENNE K-FRAME — User Manual 61
Show Files
4. To only load selected files in a show, touch the Choose Load button to
bring up the Crate Show pane that allows you to see what files are
contained in the Show, and choose which files to load by touching the
File Type buttons.
5. In the Create Show pane, touch to select/deselect file types, or touch
the
Select All button (e-DPM is an option, if not installed the button will
be inactive).
6. Select the register data pad (left of each button) and enter a series or
range of registers to be included in the Show file (the default is all).
Note A best practice is to set the E-MEM range from 0-999 each time there is an
update, this will ensure that new registers are included (the same practice can
be applied to other file types).
7. Touch the Load button in the Create Show pane to load the Show file (not
the Load Show button as this will load the entire Show file without your
File Type selections).
Load a Show from the Show Load History
Shows that have been loaded, are displayed in the Show Load History pane
on the right side of the Show Files menu. The list of previously loaded
shows are displayed until the
Clear History button is selected. The “Last
Show Load” reflects the date and time that the top item in history, was
loaded—in the current menu.
1. Select File Ops , Show Files .
2. Select a previously loaded show from the Show Load History scrolling
list on the right.
3. The selected show file is automatically displayed in the left-hand
directory pane.
4. Select the Load Show button.