Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 214)

214 KAYENNE K-FRAME — User Manual
Section 6 — Device Control
other work buffer parameters, but requires some discipline when working
with events. For other parameters, inserting keyframes without changing
values will result in no change between keyframes. But for events, this
same practice will result in reissuing the event at each keyframe. It is a good
practice to use the
Clear All Events or Clear Delegated Device Events button after
inserting or modifying a keyframe containing external device events. This
prevents those same events from being duplicated when the next keyframe
is inserted.
Operating an External Device from the GV Switcher
Preparing the External Device for Control
1. Turn on the EXT DEV button in the E-MEM & Timeline, Recall Run menu
(or whichever button your machine control device has been associated
with) and press the
EMEM Edit button in the Master E-MEM Module.
Note Devices can be assigned to any level, including 1-8 which are provided as
hard buttons in the Master E-MEM Module, in the User Setups, Suite Prefs,
E-MEM Prefs, Name Misc. Levels menu.
2. Go to the Devices, Enables menu, and touch the device you wish to
enable in the Device Enables pane (left), and touch the
Enable Selected
button (or enable all using the Enable All button) in the Enables pane
( Figure 119 ).