Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 235)

KAYENNE K-FRAME — User Manual 235
Newton Modular Control
Newton Modular Control
Introduction
The Newton modular control system provides comprehensive and consol-
idated real-time control of Grass Valley modular products. Some Newton
functionality has been incorporated into the GV Switcher menu applica-
tion. This makes it possible to control Grass Valley Gecko and Kameleon
frame modular products from a GV Switcher menu. The modular frames
must reside on the same subnet as the GV Switcher system (
Figure 128 ).
Figure 128. Newton Modular Control Diagram
Installation on GV Switcher
The GV Switcher’s Newton interface is installed during the standard GV
Switcher menu application installation procedure. The Newton menu
(
Figure 130 on page 237 ) is available on all GV Switcher systems. However,
a Newton system must be available on the GV Switcher network, and con-
figuration steps will be required before this menu becomes functional.
Selecting the NetConfig installation option from the GV Switcher Installer
program will install a compatible version of NetConfig with the NetConfig
Newton Configurator plug-in.
BNC
Inputs
Video in
Video in
8623266_91_r1
Video Out
Video Out
Example Function:
Aspect Ratio Converter
Example Functions:
Frame Sync, Video A to D
Gecko and Kamelon Knob Controls
built into Switcher Menu Application
Five Setups per Channel
Switcher Video
Processor Frame
Gecko Frame
Kamelon Frame
Ethernet
Switch
Switcher
Menu
Panel