Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 266)

266 KAYENNE K-FRAME — User Manual
Section 7 — Switching Basics
Menu Panel Overview
The Menu Panel includes a touch screen display, five knobs for adjusting
parameter values, and four USB ports (two on the right side edge of the
panel and two on the back for keyboard and mouse (wired or wireless are
supported)).
Touch Screen
CAUTION Do not apply any sharp or rigid object (no pens or pencils) to the touch
screen display surface.
The Menu Panel touch screen allows direct interaction with menu controls
displayed on the screen. The screen is designed to work with a finger or
other soft object. The touch screen is sensitive to a single pressure location
only, so only one touch surface control can be adjusted at a time.
Menu Selection
Various GV Switcher system operating menus are selected using the menu
buttons at the bottom of the Menu Panel touch screen. When a menu is
accessed, it is initially displayed in the state it was in when last used.
Soft Knobs
Knobs along the right side of the Menu Panel can be used to dial in
parameter values for functions displayed on the touch screen.
When a knob is active, the touch screen displays the parameter
name and its current value on a data pad (
Figure 145 , left). The
parameter can be adjusted by turning the knob, or the data pad can
be touched to bring up a numeric keypad.
Soft Knob
Label
Soft
Knob
Data
Pad
8623267_01
Figure 145. Soft Knob and Pad