Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 31)

KAYENNE K-FRAME — User Manual 31
The Button Mapping Menu
• Button Count buttons ( 15 , 25 , and 35 ) are used to select the button count
for the Control Panel. For example if the menu has not been associated
with a Control Panel or if using a 15 or 25 button Control Panel with a
35 button Aux Panel, the button count can be selected manually (this
selection is automatic if a panel has been associated in the
Associated
Panel data pad, in the Eng Setup, Node Settings, Frame Suite Nodes &
ID menu).The Source Select button scrolling list allows you to select a
source select button to assign a source from the Logical/Fixed Sources
list.
Special Buttons are used to assign Delegate and Shifted Levels to Source
Select buttons:
• Delegate button is used to assign the Keyer and Bus Row delegations to
source select buttons.
• Second Shift , Third Shift , and Fourth Shift buttons are used to assign those
shift levels to source select buttons.
• Same as 1st button is used to assign the source from the first level on a
bus to another shifted level for that bus (Second, Third, or Fourth).
• None button assigns the selected source select button as unmapped.
When a Special Button is selected as a mapped source for a Source Select
button, that assignment will be given to each level of that bus; each can be
changed individually afterward.