Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 147)

KAYENNE K-FRAME — User Manual 147
Set Up a DPM Secondary Global Channel
4. Select a path type by touching the S-Linear, Linear , or Curve data pads in
the Border menu pane ( Figure 86 ).
a. If Curve is selected, the Tension, Continuity, and Bias can be
adjusted using the soft knobs or pop-up keypads.
5. Touch the Width or Softness data pads and use the Size or Softness soft
knobs or pop-up keypads to adjust those values ( Figure 86 ).
iDPM/2D DPM Border Color
Adjust the border color by touching the Border Color Adjust data pad (the color
value is displayed in the data pad) and then turning the Border Hue , Border
Saturation , or Border Brightness soft knobs or using the pop-up keypads to
adjust those values ( Figure 86 ).
Note Color is applied to the entire border, there is no independent control.
Adjust iDPM/2D DPM Border Edges
The width and softness of DPM Borders can be adjusted for each edge inde-
pendently, using the soft knobs or pop-up keypads (
Figure 87 ).
1. Access the Borders Menu by touching iDPM , Borders .
2. In the iDPM (or eDPM in eDPM mode), Border menu, touch the Square
Border or Round Border button to enable Borders ( Figure 87 ).