Create a split key for a still store still – Grass Valley Kayenne K-Frame v.7.0 User Manual
Page 381
KAYENNE K-FRAME — User Manual
381
Capture a Still from Input Video
7.
Touch the
Grab
button; the captured still is displayed in the selected
output (the
Grab
button returns to
Show E-E
).
The
Show E-E
/
Grab
buttons can be pressed repeatedly until the desired
still is captured before touching the
Keep
button.
8.
With Show E-E enabled, touch the
Keep
button (
) to place the
captured still into cache.
9.
A keypad is displayed with a
Name
button (
).
Figure 230. Keypad with Name Button
10.
Choose one of the following three options:
a.
Touch
Enter
to accept the auto-generated Image ID,
b.
Type your own Image ID (1-8999) and touch
Enter
, or
CAUTION Entering an existing Image ID and touching the Enter button will overwrite the
existing image associated with that ID.
c.
Touch the
Name
button and type an Image Description in the pop-
up keyboard, touch
Enter
, and touch
Enter
again in the keypad.
The captured still will be placed in cache and displayed in the scrolling
image list in the Still menu.
Create a Split Key for a Still Store Still
A “split key” is when the key source is different than that of the video
source. When an Image Store video/key still is captured, in the Image
Store, Images, Stills menu, the video and key signals are from the same
source. Split Key allows you to change the key signal source.
1.
Navigate to the Source Ops, Image Store menu by touching the
Src Ops
Quick Tab or the
Source Ops
,
Image Store
menu buttons.