Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 356)

356 KAYENNE K-FRAME — User Manual
Section 8 — Advanced Operations
10. Touch the View Thru Enable button to turn it on. This will set the opacity
of the video in the key to 50% so you can see the shot clock through the
video which will help you align the corners of the image to the
background video (the shot clock). The opacity can be changed using
the
View Thru Opacity data pad or soft knob.
11. Touch a Corner Adjust button— Top Left , Top Right , Bottom Left , or Bottom
Right , and use the Corner Adjust X and Corner Adjust Y soft knobs to pin the
corner to the corner of the shot clock in the background video. This will
allow you very precise adjustment. Repeat for each corner.
12. Turn off the View Thru Enable feature.
If the background video changes, you can re-center the image (shot clock in
the example) using the
Pan and Scan crop buttons. You ‘Pan’ the crop; move
the crop sideways which simultaneously trims the value of the Left Crop
and Right Crop, or ‘Scan’ the crop; move the crop up and down, which
simultaneously trims the Top Crop and Bottom Crop values (
Figure 209 ).
Figure 209. Crop Pan and Scan
1. Touch the Crop Edge data pad.
2. Touch the Pan or Scan button.
3. Use the Crop Edge Pan or Crop Edge Scan soft knob to pan or scan until the
image is re-centered.