Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 77)

KAYENNE K-FRAME — User Manual 77
File Translation From Kayenne
File Translation From Kayenne
About K-Frame and Kayenne Show Files
When loading a show created on a Kayenne frame system into a K-Frame
system, all the files transfer and the configuration files will set up the
K-Frame switcher for most functionality. However, because the K-Frame
hardware is different from the Kayenne frame, some settings will need to
be changed. These adjustments affect Eng Setups, Panel Prefs, and Suite
Prefs. In addition, while Macros and EMEMs from a Kayenne system will
run, if they include fixed sources they will not produce the correct effect.
Source Patching is one way to quickly resolve that issue.
Loading a Kayenne Show into a K-Frame
Eng Setup Adjustments
• The Acquired Resources will not load from Kayenne. You should
update them first, including Acquisition of GPIs if you use them.
• The Frame Operating Mode will need to be set in the Video Settings
menu.
• Fixed Outputs connector settings will need to be updated in the
Outputs menu.
• ClipStore configuration settings will need to be re-entered. in the Clip-
Store Config menu.
• Modular I/O settings may need adjustment in the SetDef MatchDef
menu.
Note K-Frame 6.0 supports 24 PBus devices. The eight Kayenne PBus devices will
map to the first eight K-Frame devices.
Panel Prefs Adjustments
• Image Store and eDPM delegations can now be assigned separate
colors in the Panel Color Scheme menu.
• Source Colors for preview sources will need to be selected again in the
Panel Color Scheme menu.
• All Kayenne Background U1 & U2 functions are translated to the C and
D backgrounds in K-Frame. If you setup U1 and U2 for DPOP in Kay-
enne, they will transfer to C and D. The U1 and U2 buses are not used
for this in K-Frame.
• Aux Delegate Mapping for the two Image Store and six eDPM inputs
are adjusted in the Aux Delegate Mapping menu.