Grass Valley Kayenne K-Frame v.7.0 - Manual (Page 252)

252 KAYENNE K-FRAME — User Manual
Section 7 — Switching Basics
Note The HOME, Adel, and Last buttons change position in some delegated
modes, for example in Copy or Swap mode, these buttons move from the
main delegation area to the Multi-Function Module just below the joystick.
• The other buttons in the main delegation area, when in the Home
position, delegate to: Keys, Masks, Mattes, i-DPM, e-DPM Wipe,
Device, Copy, Swap, Source Select, and Panel Preference. When
pressed, the LEDs and buttons are delegated to those modes and
modifiers,
• Knob row with LEDs (middle-right) provides adjustment and display
of parameters for delegated functions (
Figure 140 ),
• Joystick (top-right) performs multiple functions depending on the del-
egation, for example for keyers the joystick positions a delegated keyer
(X,Y, and Z axis), but with device control the joystick performs jog
control operations (Up, Down, Fast Forward, Rewind—center button
performs Mark-In),
Note The joystick can be calibrated from the MFM: from Home, press Panl, Cali
and follow the instructions displayed on the MFM.
• Multi-Function Module, (bottom-right) below the joystick, supports
various delegated functions, for example Copy/Swap and Devices.
• The XFER button, displayed in the Multi-Function Module when the
Wipe menu is displayed, assigns control of values and status
display for the five other buttons in the group to the five soft knobs.
Pressing one of the soft knobs delegates control for numeric entry in
the main delegation area. Pressing
Enter completes the numeric
entry operation.
Source Select Module
The Source Select Module is available in three configurations: 15, 25, and 35
button models.