Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 94)

92 Kayenne XL Package — User Manual
Section 3 — Control Panel
The source name display between these two buttons has four lines dis-
playing the following:
• Line 1: Aux bus number
• Line 2: Aux bus name
• Line 3: Current Aux Bus source
• Line 4: Sources
Holding down the aux bus select button and pressing the row delegation
button (or vice versa), delegates that row to an aux source row. In that case
the aux bus can be selected by holding down the row delegation button.
The source selection buttons will be switched to the aux bus selection and
an aux bus can be delegated.
Delegation to Macros
• To delegate both rows 1 and 2 to macros, press the Macro button (tog-
gling macro on).
• To delegate a single row (either row 1 or row 2)
• Hold down the Macro button and then press a bus delegation
button.
• Or, hold down a bus delegation buttons, and then press the
MACRO button.
Macros are shown in groups depending on the shift level, row, and M/E.
For each M/E, each shift level for rows 1 and 2 is assigned a macro starting
number. The default condition is that all shift levels for all M/Es are
assigned to start with macro 1.
• Pressing the Macro button a second time, turns it off and the bus (or
buses) revert to previous delegations.
Delegation to Routers Source Selection
Router control involves selecting a router destination and then being able
to select a router source for this destination.
• To delegate both rows 1 and row 2 to router selection, press the Router
button (toggling router on).
• The top row shows all configured router delegations (external aux
buses).
• The bottom row shows available router sources for the router destina-
tion selected on the row above.
• So multiple source selections can be made for the same destination
if wanted.