Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 93
Kayenne XL Package — User Manual
91
Source Selection
Shift Level Delegation
•
Standard Latch Mode
•
If a shift level button is pressed, the row will be permanently dele-
gated to that shift level.
•
If the 4th level button is not assigned, both shift level buttons (2nd
and 3rd) have to be pressed to reach the level.
•
Manual Latch Mode
•
By pressing a shift level button, the row will be temporarily dele-
gated to that level. For a static delegation a double-click has to be
done.
•
The 1st level can be reached by pressing the selected shift level
button (temporarily) or bye double-clicking on it.
•
If the 4th level button is not assigned, the level can be temporarily
reached by pressing the 2nd and 3rd level button at the same time.
•
For a static delegation of the 4th level a double-click of the 2nd level
button and a double-click of the 3rd level button have to be done.
•
To reach the 1st level, one of the selected shift level buttons has to
be double-clicked twice.
•
Auto Latch Mode
•
In auto-latch mode, taking a source at a certain shift level automat-
ically causes a delegation of the source row (and source name dis-
plays) to the new shift level and tallies the shift buttons for the new
shift level. This means the bus stays delegated to the shift level.
•
To delegate a bus to a shifted level, push the shift button. The shift
button is high tallied and the source name displays show the source
names for the selected shift level. The bus now remains in this
shifted state.
Delegation to Aux Bus Selection
Aux bus delegation supports the selection of sources for any aux bus,
eDPM, iDPM and RamRecorder bus.
To functionally delegate the row 1 and/or 2 to aux bus selection:
•
Press the aux bus select button (toggle it on).
For each set of controls:
•
Pressing a button on the top row of buttons selects an aux bus (destina-
tion).
•
Pressing a button on the bottom row selects a source for the aux bus
selected on the top row.