Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 123)

Kayenne XL Package — User Manual 121
Local EMEM
Note In register mode the first press of the Cut button (after you have entered the
digits) recalls the effect. The next press of the Cut button runs the effect.
While the effect is running, consecutive pressing of the Cut button toggles
between Pause and Play.
For more detailed run controls please use the menu.
Enabling and Disabling Direct Mode
The Direct Mode permits access to a stored effect with a single key (hotkey).
The bank number is the tens digit of the register. The hotkeys are the units
digits of the register. The Direct Mode may be enabled during storing, but
this does not have any particular benefit.
Enabling Direct Mode
The Drc button toggles between on and off. If the direct mode is on, the Bnk
button becomes active. Press this button to select a bank.
Example: EFF 05 eff05 ----
Disabling Direct Mode
Press the lighting Drc button.
Display
If no editing function or store function is selected, the ?? digit display of the
subpanel may show the following indications:
• Register 24 is selected. The register is empty: iDPM24 ----
• Register 5 is selected. The register contains an effect and has no partic-
ular name: iDPM05 eff05
• Register 5 is selected. The register contains an effect with the name
ABCDEFGH: iDPM05 ABCDEFGH
Note The name can only be entered in the menu.
Selecting a Register for Storing / Editing
When you press the Store or the Edit button, the current register is
prompted in the display. If you want to use this register, just press the
Enter