Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 395
Kayenne XL Package — User Manual
393
Config Menu
be assigned as many audio channels as you like. They are displayed in the
list box Audio Source.
•
The buttons Add Source and Delete Source enable you to vary them. The
respective internal audio channel is marked blue for this purpose. To
each video input can be assigned an internal audio channel. This is indi-
cated in the third list box.
•
The listbox Audio Settings is used to perform basic adjustments:
•
M/E: The audio switcher operates only on one M/E which is speci-
fied here.
•
Program / Preset: Audio Program and Audio Preset can be mapped
on an external Aux bus.
•
The button Assign Buttons opens a second dialog page. This page
enables assignment of the audio channels to the individual buttons of
the external AUX buses for Audio Program / Audio Preset.
Operating
The audio switcher follows only PGM (PST). Only PGM is always to be
heard. The crossbar selection only is switched. If there is no audio assigned
to the video, the last audio source stays.
•
Cut PGM and PST: Sources swap related to the video.
•
Auto: Works only correctly when the associated audio sources differ
from each other. Otherwise, the equal audio sources are temporarily
muted.
•
PGM/PST: Enables you to control the two buses as EXT AUX BUSES.
When switching on these and simultaneously on the corresponding
video crossbar, the last button pressed takes precedence.
With the ESAM2 protocol, transition with the fader is not possible.