Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 164
162
Kayenne XL Package — User Manual
Section 3 — Control Panel
Loading a Clip
While turning the upper right digipot the list of available clips in the
current working folder is shown (4 clips visible at once). The clip that is
showed on the first line is always the one that is currently pre-selected (also
marked by the "<-" sign). To load the pre-selected clip, the Load button has
to be pressed. To cancel the clip selection dialog without loading a clip,
press the upper right digipot.
Note
While selecting a clip, the currently loaded clip is marked by the "
*
" sign.
For serial controlled VTRs press the List button when no clips are showed
while turning the upper right digipot.
Changing the Working Folder
Note
This feature is only available for machines which are controlled over LAN.
While turning the lower right digipot the list of available folders is shown
(4 folders visible at once). The folder showed on the first line is always the
one that is currently pre-selected (also marked by the "<-" sign). To make the
pre-selected folder to the current working folder, press the LOAD button. To
cancel the folder selection dialog without changing the working folder,
press the lower right digipot.
Note
While selecting a folder, the current working folder is marked by the "*" sign.
Device Settings buttons related to external VTRs:
•
List
Update cliplist of selected device. This function is mainly used for serial
controlled VTRs. By pressing this button, the names and durations of all
clips which are available in the current working folder are transferred
to the switcher XL system. This has to be done for instance on system
startup or after the working folder has been changed.
For devices which are controlled over LAN, the cliplist is updated auto-
matically in most cases (e.g. change of working folder, startup).
Note
If a new clip has been locally created on an external device, or an existing clip
has been deleted, the cliplist has to be updated manually - even on VTRs con-
trolled over LAN.
•
Loop
Enable or disable Loop Mode for AMP controlled devices.