Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 548)

546 Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
can be controlled by the motion control buttons or by the DPM digipot on
the right side.
The effect selection can be learned in a macro. Since you can run up to four
DPM effects simultaneously, learning motion control commands in macros
has to be done carefully.
Pressing the Play button while learning a macro, this macro will record a
play command for the first channel in the selected effect.
Example:
If the effect contains channel 2, 3, 4 – the macro will record the play command for
channel 2. This macro can be used to play any effect containing at least channel 2,
because a play command for one of the used channels will play all used channels.
So 4 macros is enough to play all effects.
Current Effect Number
In this section you find an indication of the selected effect per channel. This
can differ from the last recalled effect, since an effect recall only loads the
channels included in the DPM effect.
Delegate Button
Delegating the menu to an M/E or P/P stage of the switcher.
Highlight Effect No.
This feature is only a help to get a quick overview, which channel is used in
which effect. This is only important for customers using the DPM as a mul-
tiple DVE. The overlay row is special and consists of two parts, which have
to be selected independently:
• No show: No highlighting
• 1 incl.: Highlight all effects which contain at least one of the selected
channels.
• All incl.: Highlight all effects which contain all of the selected channels.
• Exact: Highlight all effects which contain exactly the selected channels.
• Chan 1 (... 4): Toggle selection channel 1(... 4): ”-- -- --” is off, ”chan 1” is
on.
• Global: Toggle selection global: ”-- -- --” is off, ”global” is on.