Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 321)

Kayenne XL Package — User Manual 319
Install Menu
Modify UMD Addresses
To modify the UMD address, select the parameter from the list in the
central pane. Then press Modify to change the parameters.
Select the device address (see the HEX switches on the rear panel of the
UMD devices). The UMD devices will use only the LSB of the physical
MPK addresses (which is a 32 bit address).
Valid range: 00 ... BF (FF disables the device handling = not installed).
For details, refer to your Under Monitor Display manual.
Modify UMD Display
To modify the display select the parameter from the list in the central pane.
Then press Modify to change the parameters.
The name of the selected source on this bus will be displayed on the respec-
tive display of your UMD device