Grass Valley Kayenne XL Package v.7.0.4 - Manual (Page 601)

Kayenne XL Package — User Manual 599
DPM Menu
The effect selection can be learned in a macro. Since you can run up to four
DPM effects simultaneously, learning motion control commands in macros
has to be done carefully.
Pressing the Play button while learning a macro, this macro will record a
play command for the first channel in the selected effect.
Example:
If the effect contains channel 2, 3, 4 – the macro will record the play
command for channel 2. This macro can be used to play any effect con-
taining at least channel 2, because a play command for one of the used
channels will play all used channels. So 4 macros is enough to play all
effects.
Motion Control Buttons
The selected effect (light blue background) can be controlled by the motion
control buttons (Begin, Reverse, Pause, Play, End) or by the DVE digipot on
the lower right side.