Panel delegation – Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 120
118
Kayenne XL Package — User Manual
Section 3 — Control Panel
Panel Delegation
Figure 76. Panel Delegation
shows a Local EMEM module delegated to Panel
Delegation. This module is in a 2 M/E Panel and connected to and 2.5 M/E
Kayak HD.
Pressing the light blue colored DELEG button delegates the module to Panel
Delegation mode, showing M/E1 through M/E4 plus PP for the four
bottom most rows of the panel surface. If there are less than 4 stripes, then
only the appropriate number of rows will be shown. If there are more than
four stripes, then a push of the DELEG button will show the M/E delega-
tions for those additional stripes.
In Panel delegation mode all buttons are colored low tally white if the M/E
exists in the suite, otherwise the buttons are off. Current selections are high
tallied with the defined M/E color.
All button rows are radio buttons. Pressing a button delegates that row of
the panel to the selected M/E.
It is possible to have the same selection on more than one row.