Grass Valley Kayenne XL Package v.7.0.4 User Manual
Page 320
318
Kayenne XL Package — User Manual
Section 4 — Sidepanel Menu Summaries
To program the Under Monitor Display connected to your switcher system,
press the respective buttons on the top of the menu page:
•
Set Port: Touching the Port button opens a dialog with all ports plus
None like in all other menus where a port must be configured.
Note
The port must be different to the ports used for Routers, DVEs, Editors, ext.
DSKs, etc.
Figure 252. Install E-Box UMD Port
•
Reset: Touching the Reset button sets the display assignment to default
values.
Figure 253. Install E-Box UMD Reset
•
Tally Mode:
•
Red/Red: The LEDs of the UMD will signal a red tally.
•
Red/Yellow: The right LED will signal a red tally and the left LED
will signal a yellow tally.
•
Red/Off: The right LED will signal a red tally and the left LED is not
used.
Figure 254. Install E-Box UMD Tally Mode
•
On Air Display: Touching the On Air Display button switches the tally sig-
nalization on or off.